Description
BAR AUTOTECH Ultra-Compact LED Turn Signal Relay | Small Size, Easy to Hide Wiring
When your LED turn signals flash too quickly or blink abnormally after replacement, the BAR AUTOTECH Ultra-Compact LED Turn Signal Relay can be used to help correct the issue.
Its compact size takes up very little installation space, making it easy to install inside the fairing, around the wiring harness, or in tight areas with limited space.
Compared with adding resistors, this relay does not add extra load to the turn signal circuit, making it a cleaner wiring solution for LED turn signal upgrades.
【Ultra-Compact Size, Easy to Install】
Measuring only 14 × 10 × 7 mm, this relay takes up minimal space and is suitable for installation inside the fairing, near the light wiring harness, or in other limited spaces.
【Helps Correct LED Turn Signal Hyper Flashing】
Designed for 12V LED turn signal upgrades, it helps correct common issues such as rapid flashing and irregular blinking.
【No Resistor Required】
Compared with adding resistors, this relay does not add extra load to the turn signal circuit, helping keep the wiring cleaner and simpler.
【Waterproof, Short-Circuit Protection, and Vibration-Resistant Design】
Features waterproof, short-circuit protection, and vibration-resistant properties, making it suitable for daily motorcycle use and modification environments.
【Universal 12V Modification Part】
Suitable for most 12V motorcycle LED turn signal upgrades. Please confirm the original wiring and connection method before installation.
【Product Specifications】
・Product Name: Ultra-Compact LED Turn Signal Relay
・Size: 14 × 10 × 7 mm
・Voltage: 12V
・Power Range: 1–30W
・Application: 12V LED turn signal upgrade
・Installation Method: Wired installation
・Function: Helps correct LED turn signal hyper flashing / irregular blinking
・Features: Waterproof, short-circuit protection, vibration-resistant
・Unit: PCS
【Installation Notes】
This product is a universal modification part and must be connected in series with the turn signal wiring.
Connect the relay “+” to the positive power supply, and connect the relay “-” to the positive wire of the turn signal. The negative wire of the turn signal should be connected back to the negative power supply.
Please confirm the original wiring and positive/negative polarity before installation.
Wiring designs may vary depending on the motorcycle model. Actual performance may vary depending on the original electrical system and turn signal specifications.
If you are not familiar with motorcycle electrical systems or wiring, professional installation is recommended.
【Unboxing Video for Mutual Protection】
⚠️ Please record a video before opening the package to protect both parties’ rights.
⚠️ This product comes with a 7-day appreciation period. Please confirm whether the product meets your needs after receiving it. For returns or exchanges, please make sure the product is unused and the packaging is complete, and contact us within the allowed period.
⚠️ Damage caused by improper installation or human error is not covered.
⚠️ Vehicle modification is a personal decision and responsibility. Before making any modifications, please confirm whether the modification complies with applicable laws and regulations. Our company shall not be held responsible for any issues arising from illegal modifications. Thank you for your understanding.
